The true performance of your building system can not be measured with the R-value of the insulation alone. You must also consider air movement, moisture control, health, safety, durability and comfort as well as energy efficiency.
This is true whether your building is commercial, residential, or multifamily … Minnesota Spay Foam Insulation addresses all of these needs.
Minnesota Spray Foam Insulation meets the insulation requirements for both new construction and improvements to existing structures.
Metal Roof Restoration with advanced polymeric encapsulation
Performance features:
- Cool roof technology
- Excellent UV stability
- Surface preparation (remove loose rust and paint)
- Prime – Roof Tek@ rust inhibiting primers are applied to the entire deck surface
- Fasteners are tightened and sealed
- Seal – Roof is spray-sealed with multiple coats of durable, lightweight coatings such as silicone, arcylic, urethane or polyurethane.
Special colors can be provided upon request.
Polyurethane Foam System for high performance protection
Performance features:
- Smooth, continuous surface with no edges, seams or joints
- Self-flashing
- 100% adhesion, no fasteners are needed
- Grips the building walls and holds tight against high winds
- Protects the buildings interior from leaks or water damage
ENERTITE US
Open-cell spray-applied polyurethane foam (SPF) insulation.
Ure-K & Polyurethane Uses
- Freezers
- Coolers
- Refrigerated Warehouses
- Metal Buildings
- Underground Parking Decks
- Projects Requiring High R-Values
- Curtain Wall Hi-Rise Buildings
- Tilt-Up Precast & Poured-In-Place Concrete Construction
- Energy Conservation
Thermal Barrier
Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of how melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing buildings or it can be used as a protective coating over foam in new construction projects as a combination system.
Thermal Insulation
Ure-K applied over polyurethane provides additional thermal resistance which will meet the stringent ‘R’ values required for today’s energy conservation needs. The combination of Ure-K and polyurethane has the highest efficiency of all available insulations.
Noise Control
Ure-K is a monolithic coating which will provide a highly efficient sound absorption surface in either new and existing buildings. This is an important benefit in controlling noise levels to meet OSHA and other requirements.
Installation
The Ure-K fibers and liquid binder are applied to the surfaces simultaneously in separate streams through equipment especially engineered to control the material density and adhesive/fiber ratio. The Ure-K binder provides excellent adhesion to all types of polyurethane foam insulations.
BASF SPRAYCOAT 1920
Spraycoat 1920 – Ignition barrier for attics and crawl spaces. Spraycoat 1920 coating is an ignition barrier coating for interior spray polyurethane foam insulation. Is it a water based latex system and cures within 24 hours. It provieds a long term protective shield to prevent direct impingement of a flame source on the spray polyurethan foam surface.
DC315 THERMAL BARRIER
DC 315- 15 Minute Thermal Barrier for Spray Foam Insulation
Now you can earn 2 LEED points for using DC 315
The LEED (Leadership in Energy and Environmental Design) green building certification program encourages and accelerates global adoption of sustainable green building and development practices through a suite of rating systems that recognize projects that implement strategies for better environmental and health performance.
Using DC 315 in projects can earn buildings 1 point for use of a low VOC, low emitting product, and an additional point because DC 315 contains no Formaldehyde!
FLAME SEAL TB
Flame Seal-TB™ (aqueous based resin) is a spray applied fire protective intumescent coating, which satisfies thermal barrier / ignition barrier requirements of the IBC code when applied over Spray Polyurethane Foam (SPF) insulation.
